hello world – 3, part 3

aving put no pressure on a launch day, I spend my free time thinking over about the implementation details, trying to apply lessons learnt from my previous boats. From what I’ve learnt from the internet, boat building forums, books… to the reality is a quite different thing. Here in Vietnam, the materials, tools are not the same, no West System epoxy, no marine grade plywood, no good carbon fiber, even the vendors don’t know what is S – class fiberglass.

“The epoxy can be mixed at any ratio”, said the seller, no reliable way to mix paints to the correct desired colors, etc… even the “words”, the “terminologies” used to communicate between the seller and buyer is kind of mess, no standard, no common understanding. Well, a bit off topic here but, Vietnam has always been a very bizarrely unorthodox country, anyone has the same thinking as me!? At least I’ve been feeling so ever since I was 17, 18 years old or even younger.

Hence, my boat building progress has been a tedious learning curve, as I have no trustable standards here, and many trials and fails have to be done. Anyhow, after 2 builds, I’m quite confident now, to start the third boat that I think will meet my quality standards. Begin to measure, draw, and cut of the plywood today, then joining the parts together, then stitch them up. Stitch and Glue is no longer a challenger for my skills now, maybe with the next boat, I’ll try another different building method.

But that’s another thing, just concentrate on the building of Hello World – 3 for now, simple things that need to be properly executed! In total, 22 pieces cut, and 15 joints need to be made just for the hull and deck. The overall structure of this kayak is like nutshell, you will be building 2 halves, then stitch them together. Cutting only takes me half a day, but joining will take considerably much more time. I used 4 mm plywood for both the hull and deck, as I had difficulty purchasing the 3 mm ones.