itting the Beckson hatches, fore and aft, is quite straight – forward and just takes about half an hour or so. The hatches are glued with silicone sealant, then screwed to the deck. I also applied a silicone – based mold – release spraying agent as lubricant, which secures a very fine and watertight fit. With these Becksons, I won’t have to worry about water leaking anymore, and even that the gears carried inside (e.g: electronics) don’t need to be packed in waterproof bags.
4th, 5th images below: the cockpit and some other parts on the deck painted. I decided to increase the amount of color pigment to turn the dark brown color into almost black to match that of the Beckson hatches. 6th image: I repaint the deck vs hull jointing line as the previous is quite ragged cause I used the wrong type of duct tape (which lets the paint leak underneath). In this Serene – 1, I don’t “cut corner” anymore, when something’s not right, I redo it until it’s good enough!
7th, 8th images: the hull painted, the dark brown color has become almost black now. I use a foam roller to quickly make the first layer of paint, then use a brush to apply the second (and last). It’s smooth enough, don’t have to sand & repaint another time as in my last boat. At this point, the boat is technically ready for water already, but yet some more painting and fitting jobs needed on the deck. Tell myself to be patient, I can’t even just wait for the paint to dry out in this moment! 😀
Well, some plastic parts on a wooden boat doesn’t look very attractive to some eyes, and initially, I’d preferred wooden hatches too, but such thing leaks no matter how good you make it. In my last trip to Đồng Hoà, I had to stop twice to drain water out when it has filled more than 1/3 of my boat.
So safety is the primary concern over aesthetics. One who’s paddled in rough conditions would understand the very fearsome instability of a boat half – filled with water, not only it’s more heavy to paddle, the whole thing becomes a very thrilling acrobatic game indeed.