serene – 3, part 1

t’s time to move on to a new kayak design 😀. Lessons learnt from my last failed trip signifies the necessity for a boat design that is geared toward a wide range of self – rescue actions such as: balanced brace, roll and wet – entry. Thanks to the very dynamic world – wide sea – kayak community, which constantly invents and improves various techniques, I’ve updated myself to some newer self – rescue techniques which I consider to be critically important for long cruising trips.

My previous boat, Serene – 2 has some obvious shortcomings though: initial stability is still slightly problematic, especially for reentry; the electricity system, though working very well, is hard to repair or upgrade, this is due to my inexperience with electrical wiring. I would incorporate into this kayak design various small improves here and there: the storage compartments and hatches would be rearranged to better utilize the boat’s volume, a new rudder system with better responsiveness, etc…

For the last 2 months, most of my free times is directed toward working with FreeShip, the very helpful boat – designing software. Some design parameters: LOA: 5.2m (17′), Beam: 46 cm, Displacement: 120 kg, Cp (prismatic coefficient): 5.3, S (wetted surface): 1.95, Cb (block coefficient): 0.39, Cw (waterplane coefficient): 0.7… The most important change compared to Serene – 2 is a significant increase in rocker, the boat is now much curvy, having the mid section deeper seated in water.